Paco's Acu'rizer Tool

Sponsors of Leverguns.Com

ACU’RZR

PHASE III NASTI-NOSE

PHASE IV BABY-SCORP’N

THE ACU’RZR TOOL NOW COMES IN TWO FORMS... THE REDESIGNED NASTINOSE CALLED THE PHASE III TOOL. AND THE NEW BABY SCORP’N CALLED THE PHASE IV TOOL.

IN THE PHOTO BELOW (PHASE III) THE RE-DESIGNED NASTINOSE IS THE FIRST TOOL, LONGER AND THINNER. THE NEW PHASE IV, BABY SCORP’N, IS THE SHORTER AND HEFTIER VERSION. BOTH DO DIFFERENT THINGS.... AND PRODUCE DIFFERENT TYPES OF 22 RIMFIRE AMMO.

THE NASTINOSE PRODUCES A DISHED HOLLOW POINT THAT LOOKS LIKE AN ASHTRAY FOR A 22RF NOSE. WHEN IT STRIKES THE TARGET, IT OPENS QUICKLY AND EFFICIENTLY... UNLIKE MOST COMMERCIAL 22RF AMMO WITH SMALL HOLES AND NEGLIGIBLE EXPANSION FOR HOLLOW POINTS... THE NASTINOSE WILL OPEN EVEN STANDARD VELOCITY AMMO. IT WILL NOT EXPLODE ON CONTACT LIKE THE HYPER-VELOCITY AMMO. EVEN 22 RIMFIRE SHORTS WILL WORK LIKE THEY NEVER HAD BEFORE.

THE HYPER STUFF IS FINE FOR VERMIN AND SUCH. I USE IT OFTEN, OR USED TO. I DON’T NEED TO PAY THEIR HIGH PRICES ANYMORE, WITH MY TOOLS AT HAND.... ANYWAY, FOR SMALL EATING GAME LIKE SQUIRRELS THE HYPER AMMO IS TOO MUCH. AND THE MEDIUM VELOCITY, HOLLOW POINTED COMMERCIAL AMMO OFTEN FAILS TO OPEN. BUT NOT SO WITH THE NASTINOSE. THERE IS A WHOLE NEW WORLD WITH INEXPENSIVE ROUND NOSE 22 RIMFIRE AMMO WAITING FOR THE SHOOTER WITH NASTI-NOSE..

FOR THE PRICE OF TWO BOXES OF HYPER STUFF, I PURCHASED 550 ROUNDS OF MEDIUM VELOCITY ROUND NOSE FEDERAL AMMO. IT TOOK ME ONLY 15 MINUTES WHILE WATCHING T.V. TURNING THEM INTO NASTINOSE AMMO.

ALL AMMO PRODUCED IN THE TOOLS COMES OUT MORE ACCURATELY BECAUSE THE BULLET DIAMETER COMES OUT THE SAME EVERY TIME. THE NOSE SHAPES MAY DIFFER AS PER CHOICE OF HUNT OR TARGET.

22RF RIFLES AND HANDGUNS ARE NOTORIOUS FOR BEING PERSNICKETY ABOUT THE AMMO THEY LIKE AND SHOOT WELL. THE GUN IN QUESTION MAY STILL BE CHOOSY ABOUT THE AMMO IT WANTS... BUT IT WILL GIVE BETTER ACCURACY WITH WHAT EVER IT WANTS AFTER REFORMING.

THAT BRINGS US TO THE DISH NOSE SHAPE. THE DISH NOSE FORMING ROD IS FOR ACCURACY AND PAPER TARGETS. IT MAKES VERY SHARP AND CLEAN CUT HOLES IN PAPER... AND THE CONSISTENCY OF THE BULLET DIAMETER PULLS THE GROUPS TOGETHER.

DIFFERENT BORE DIAMETERS IN 22 RIMFIRE GUN BARRELS NEED DIFFERENT DIAMETER BULLETS. THE VAST MAJORITY OF BARRELS RESPOND TO .223 AND .224 DIAMETER AMMO VERY WELL SO OUR STANDARD TOOL IS CHAMBERED ON EACH END FOR THOSE TWO SIZES. LOOSE REVOLVER TYPE HANDGUNS RESPOND TO .225 SOMETIMES BETTER THAN THE TIGHTER DIAMETERS. MEASURE YOUR BORE AND SEND US THE DIAMETER. IF YOU CAN, PULL A BULLET OUT OF A 22 RIMFIRE ROUND AND PUSH IT THRU A BARREL WITH A CLEANING ROD. SEND IT IN WITH YOU ORDER. WE WILL HANDLE THE CORRECT CHAMBERING.

THE PHASE III COMES WITH THE DISH/TARGET NOSE FORMING ROD AND THE NASTI-NOSE FORMING ROD AND TWO CHAMBERINGS IN THE SAME TOOL. THEY ARE MADE OF STRONG BRASS, NEVER TO RUST OR CORRODE.

THE PHASE IV, COMING OUT THIS MONTH, WILL HAVE A DISH NOSE FORMING ROD AND THE NEW BABY SCORP’N FORMING ROD. THE SCORP’N ROD WAS DESIGNED TO HAVE THE BULLET STILL EXPAND ALMOST AS MUCH AS THE NASTINOSE... BUT THE INTERNAL POST IN THE CENTER OF THE HOLLOW ALLOWS FOR GREATER PENETRATION ON LARGER SMALL GAME. AS THE SCORPIONS IN THE DESERT SOUTH WEST HAVE NASTY STINGING TAILS THAT TEND TO STRIKE RIGHT OVER THEIR NOSE, SURPRISING THEIR ENEMY, SO DOES THE 22 RIMFIRE BABY SCORP’N NOSE... BUT WITH A GOOD DEAL MORE KILLING POWER.

Paco Kelly's Acu’rzr

PHOTO of BULLETS:

FIRST ROW SHOWS THE BABY SCORP’N...YOU CAN SEE THE OPEN HOLLOW WITH A POST IN THE CENTER. LAYING DOWN BESIDE THEM, THE ROUNDS SHOW A SLIGHT ‘TIT’ OF THE POST SHOWING. THE THREE EXPANDED BULLETS WERE TAKEN FROM TOUGH OLD JACK RABBITS.

SECOND ROW SHOWS THE NASTINOSE, VERY LARGE DISHED HOLLOW POINT, EVEN ON 22RF SHORTS... TOP EXPANDED BULLET IS A 40 GRAIN STANDARD VELOCITY TAKEN FROM A CAT. BOTTOM EXPANDED BULLET FROM A STANDARD VELOCITY 29 GR SHORT, TAKEN FROM A DESERT RAT.

THIRD ROW IS THE DISH NOSE FOR TARGET WORK CUTS NEAT ROUND HOLES IN PAPER. SMALL EXPANDED BULLET AT THAT ROW SHOWS IT WILL HARVEST A SMALL ANIMAL ALSO.

THERE ARE THREE SELECTIONS YOU CAN CHOOSE FROM, FOR AN ORDER....

**1. THE ORIGINAL, BUT NEWLY DESIGNED ACU’RZR WITH THE DISH AND NASTI-NOSE FORMING RODS.... PHASE III. THAT IS $38 PLUS $5.00 for shipping.

**2 THE BABY SCORP’N HAS THE B-SCORP’N AND DISH FORMING RODS, WITH THE HEAVY BASED TOOL. THAT IS $43 PLUS $5.00 for shipping.

**3 AND THEN THERE IS THE COMBO-ACU’RZR WHICH HAS ALL THE FORMING RODS ON THE HEAVY TOOL BODY FOR $53 PLUS $5.00 for shipping.